Spa Chlorine Granules for Hot Tub

SPA AND HOT TUB USE: This product will provide approximately 1.4 ppm available chlorine in 500 gallons of water with each level teaspoon (0.17 oz.) used. To ensure proper spa and hot tub operation, it is important to test and adjust the water to the following values using an appropriate test kit: pH 7.2-7.8, total alkalinity 60-100 ppm, calcium hardness 200 ppm minimum. Regular testing with a test kit is recommended to maintain these conditions. It is crucial not to exceed a cyanuric acid level of 150 ppm. Draining spas and hot tubs every 30-90 days is recommended, especially under heavy use. Manufacturers should be consulted regarding the compatibility of chlorine sanitizers with their equipment. Foaming or cloudy water and reduced efficacy of chlorine sanitizers may occur when using oils, lotions, fragrances, and cleaners in combination with chlorine sanitizers.

START-UP (FRESHLY FILLED): 1. Make sure the circulation system is turned on and functioning properly. 2. Add 6 teaspoons of this product for each 500 gallons of water. 3. Check the free available chlorine (FAC) level and repeat the process if it is below 4-5 ppm. Re-entry into treated spas is prohibited above levels of 3 ppm of chlorine.

Chlorine granules for hot tubs and spas Initial dose: Add 6 teaspoons of this product for each 500 gallons of water Each level teaspoon (0.17 ounce) of this product will provide approximately 1.4 ppm available chlorine in 500 gallons of water Dissolves quickly and completely Controls algae and kills bacteria

product information: